منتجاتنا
AD-4530
£
AD-4530
£
-
eatures
Low cost digital indicator for various applications. Suitable for measurement of load, pressure, torque, tension
and more at an affordable price.
Digital Zero (DZ) stores zero data at any measurement point. This function can also be used to tare weight.
Measurement can simply be restarted when it was interrupted by a loss of power.
Power on zero function adjusts to zero when the power is turned on.
Digital filter provides stable measurement results.
Digital span calibration. Easy calibration just by inputting the rated output of a sensor. No need to use a mass.
Unit characters - Up to five alphanumeric characters can be added to serial output.
Comparator function displays and outputs HI, OK and LO according to upper and lower limit settings. Hysterisis
width and time can be set to prevent chattering on the output terminal. This reduces load on the relay circuit.
Hold function. Selectable from sample hold, peak hold, bottom hold and bipolar peak hold. The peak hold
function allows the user to capture the peak value and easily obtain the maximum value of a destruction test
or tightening torque.
Latch function holds display value/comparator (optional)/analog output (optional)/serial output (optional)
corresponding to external latch input.
Various data output (optional). Necessary data can be easily obtained using optional comparator relay output,
serial output (RS-485/RS-232C), D/A voltage output and D/A current output.
AD-4531A Multi purpose Digital Indicator
£
-
Features
Digitally processed signals with 16 times/s A/D conversion
Peak hold and hold capability
"Hold Mode" data stored digitally to prevent drooping on display and analog output
Comparator function and output.
Analog output with scaling and offset functions
Full digital calibration-Digitally span calibrated by entering a sensor output voltage
through the keyboard or input using the optional RS-232C interface.
Data digitally held in memory. Hold and analog output are stored without any drooping.
Easy on relieves user of repetitive adjustments.
Compact DIN size body for digital key operating greater installation flexibility.
Averaging time and display update rate can be selected for various applications.
Digital display hold, peak hold and bottom hold.
Replace circuit board and front key board without disconnecting any wires.
Easy, fast and low-cost maintenance. Analog output with offset and scaling functions.
Variety of data outputs: Average, digital peak hold, analog, hysteresis compensation comparison.
Analog low-pass filter removes noise from signal inputs.
RFI/EMI screened to comply with U.S., Canadian and other international regulations.
Either standard data or digital peak data outputs are available through optional RS-232C,
current loop or 4-20mA analog output interface.
AD-4531B Digital Indicator
£
-
Features
Suitable for load, pressure, torque or tension measurement plus more
Digital span calibration possible without using an actual load
Zero correction value can be backed up
Various output options available
Performs A/D conversion at 100 times per second
AD-4532B Digital Indicator for Strain Gauge Sensors
£
-
uper high-speed sampling at 2000 times/sec.
Ideal for measuring the dynamic phenomena of
loads, pressure, torque, tension, etc.
سجل معنا في القائمة البريدية ليصل اليك كافة المستجدات والعروض التي هي محل اهتمامك