خارج المعمل
WattNode 208/240 VAC 1,2, or 3 Phase Wye kWh Transducer Sensor
£
-
The WattNode provides accurate measurement at low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications. This WattNode Wye-connection kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should be used only by qualified personnel.This model supports a 1,2, or 3-phase wye-connection of 208/240 VAC.
WattNode 208-240VAC 2 or 3 Branch Circuit kWh Transducer Sensor
£
-
The WattNode sensor provides accurate kWh measurement at a low cost to meet your needs for sub-metering, net-metering, energy management, and performance contracting applications.
This WattNode kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter, or a HOBO® Data Node pulse input port to provide True RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should be used only by qualified personnel. This model supports up to 3 separate 120 VAC single-phase branch circuits or individual 120 VAC phases of a 3-phase wye-connection 208/240 VAC circuit.
Type J 6 ft Beaded Thermocouple - Range: 0 to 250°C (32° to 482°F) Sensor
£
-
The Type J 6 ft Beaded Thermocouple probe includes 1.8m (6') of insulated 30-AWG wire wound on an integrated spool caddy /subminiature connector. Color-coded for type J (black) thermocouples according to the ANSI standard.
Type K 6 ft Beaded Thermocouple Sensor
£
-
The Type K 6 ft Beaded Thermocouple probe includes 1.8m (6 feet) of insulated 30-AWG wire wound on an integrated spool caddy /sub miniature connector. Color-coded for type K (yellow) thermocouples according to the ANSI standard.
Type T 6 ft Beaded Thermocouple Sensor
£
-
The Type T 6 ft Beaded Thermocouple probe includes 1.8m (6') of insulated 30-AWG wire wound on an integrated spool caddy /subminiature connector. Color-coded for type T (blue) thermocouples according to the ANSI standard, this probe is teflon-insulated and responsive over a range of -200° to 180°C (-330° to 356°F) with an initial accuracy of ±1.5°C (±2.7°F). Overall accuracy varies with attached logger.
Type K 12" Probe Thermocouple Sensor
£
-
The TCP6-K12 Type K thermocouple probe can measure up to 900°C (1650°F) when connect to the UX100 thermocouple logger. The TCP6-K12 stainless-steel probe is 30cm (12") in length, 0.5cm (3/16”) in diameter and is mounted on a 2.5cm (1") handle with spring-type strain relief. The 1.8m (6 foot) 19-AWG cable meets ANSI specifications, complete with isolated thermocouple color-coded for type K (yellow) thermocouples.
سجل معنا في القائمة البريدية ليصل اليك كافة المستجدات والعروض التي هي محل اهتمامك