Stevens SDX Pressure Sensor
Stevens SDX Pressure Sensor
Overview
The Stevens SDX (Submersible Depth Transmitter) is a high-accuracy water level/depth sensor that works with Onset’s HOBO® RX3000 cellular weather station to bring your water level data to the web. Suitable for a wide range of level monitoring applications, the SDX is a cost-effective option for remote, real-time water level data collection. It is recommended that each SDX vent tube is protected from water ingress with either a vent tube cap (T-SDX-93030-500) or a desiccant cartidge (T-SDX-93030-010).
Highlighted Features
- Rugged housing and fully-potted electronics ensure reliability, even in hostile fluid environments
- Provides remote access to water level data when paired with HOBO RX3000 weather stations via Onset’s web platform, HOBOlink.com
- Custom-length cables enable use in a wide range of wells
- Typically provides +/- 0.1% accuracy (full scale)
- Ideal for groundwater and aquifer monitoring, stream and river gaging, and storm surge monitoring and more
- Pre-configured kits available combining the HOBO RX3000 cellular remote monitoring station with the Stevens SDX water level sensor
Note: A calibration certificate is not included with the purchase of this sensor. If you require a calibration certificate, please call sales at 1-800-LOGGERS.
In what environment does this sensor operate?
This sensor operates in outdoor and underwater environments.
What measurements does this sensor support?
The T-SDX-93720-xxx-xxx sensor supports the following measurements: Remote Water Level Monitoring, Water Level and Water Pressure
To see the full specifications for this product, please see our product manual found under the documentation tab if available
Power requirements |
9 - 30 VDC |
Output |
4-20 mA current signal, linearly corresponding to range |
Operating temperature |
-40° F to 185° F (-40° C to 85° C) |
Compensated temperature |
32° F to 122° F (0° C to 50° C) |
Linearity |
0-5 ft range: 0.2% max. |
Repeatability & hysteresis |
Typical: ± 0.2% span |
Reverse polarity protection |
Built into sensor |
Overpressure |
0-5 ft: 20 psi max. |
Shock |
Qualification tested to 150 g |
Wiring |
Red: power |
Pipe threading |
1/2-14 straight pipe thread (back of sensor housing near cable) |
Physical size |
4.00" L x 0.84" dia. (101.6 mm L x 21.33 mm dia.) |
Weight |
Probe: 2.37 oz (61.19 g) |
Part Numbers:
T-SDX-93720-105-010
T-SDX-93720-105-020
T-SDX-93720-105-030
T-SDX-93720-105-050
T-SDX-93720-105-100
T-SDX-93720-110-010
T-SDX-93720-110-020
T-SDX-93720-110-030
T-SDX-93720-110-050
T-SDX-93720-110-100
T-SDX-93720-135-020
T-SDX-93720-135-030
T-SDX-93720-135-050
T-SDX-93720-135-100
T-SDX-93720-150-050
T-SDX-93720-150-100
|
سجل معنا في القائمة البريدية ليصل اليك كافة المستجدات والعروض التي هي محل اهتمامك