lab-suppliers

AD-8922A Remote Controller

الكود :

AD-8922A

التقييم :

AD-8922A Remote Controller

Features

Displays weighing data

Remotely controls a weighing instrument with key operations (no access to the internal settings)

Outputs weighing data to another external device such as a PC or printer via the RS-232C connection

Optional BCD, comparator, and analog outputs available

Can be panel-mounted

Options

AD-8922A-01         BCD output
AD-8922A-04         Comparator output
AD-8922A-05         Current loop input
AD-8922A-06         Analog output

Specifications

Power supply	AC adapter
Power consumption	Approx. 11 VA including the AC adapter (Approx. 1.5 VA for the AD-8922A)
Standard interface	RS-232C
Baud rate	600, 1200, 2400, 4800, 9600, 19200 bps
Refresh rate	Approx. 10 times/second (when the baud rate is 2400 bps or greater).
Applicable connectors	D-Sub 9-pin (Male) to connect to the weighing instrument DIN 8-pin (Female) to connect to an external device
Dimensions	238 (W) × 132 (D) × 170 (H) mm
Net weight	Approx. 1.0 kg
Standard accessories	AC adapter, communications cable (Approx. 2 m)

Weighing instrument	AD-8922 Key
Weighing instrument	ON:OFF	CAL	SAMPLE	PRINT	MODE	RE-ZERO
AD-4212C	Turns the weighing instrument display on or off. *1	Calibrates using the external mass.	Switches the minimum display. *2	Outputs the received data to an external device. *3	Switches the response characteristic.	Sets the display to zero.
GX, GX-K, GP, GH, ET-W, FZ-i		Calibrates using the internal mass.			Switches the unit displayed. *4
GR		Calibrates using the internal mass.
GF, GF-K, EK-H, AD-4212A/B, HR, HR-i, FX-i		-
EK-i,EW-i	-	-	-
EK-G, EW-G, FC-i,FC-Si, FG, FG-L,FG-M, FP, FS, FS-KL,HV-G, HV-WP, HW-G,HW-WP	-	-	-		-	-

Note: "-" in the table indicates that the key operation is not available.
*1: Switches between standby and weighing mode on the AD-4212C.
*2: Not applicable to the counting mode and the percent mode. Switching the minimum display is not available for the ET-W.
*3: Available when the AD-8922A is in key mode ("out 1" or "out 2" of the function setting).
*4: Not available for the ET-W and AD-4212

Page Top