PowerPRO 3AMP Power Supply, 300V, 3000mA, 300W
PowerPRO 3AMP Power Supply, 300V, 3000mA, 300W
Description
At 300V, 3000mA, 300W, the PowerPro 3AMP is designed for virtually all high current electrophoresis applications. The PowerPro 3AMP’s higher current output capability is perfect for electroblotting units with high-intensity plate electrodes, particularly Cleaver Scientific omniBLOT maxi, VS20 WAVE and semi dry blotting systems.
Electrotransfers may be performed as timed runs in constant or programmable mode to prevent overheating and buffer depletion. A run time extendable to a maximum 999 minutes in constant mode is also useful for overnight transfers undertaken at constant low current in wire electrode systems.
The PowerPro 3AMP shares the built-in protocol and constant parameter features of the other PowerPro models. PowerPro 3AMP is the ideal power supply for:
- Vertical Electrophoresis using omniPAGE Maxi.
- Blotting using omniBLOT and semi-dry blotters.
Catalogue Page Number: 61
This unit has a 12 month limited warranty, for more information, consult our terms and conditions.
| Unit Dimensions (cm) | 21.5 x 33.5 x 10.4 |
|---|---|
| Weight (Kg) | 2.1 |
| Construction | Flame retardant ABS faceplate |
| Timer | 1~999 mins |
| Resolution | 1V, 10mA |
| Input Voltage | 100-240V: 47-60Hz, 410W |
| Operating Temperature | 4℃~ 40℃ |
| Operating environment | ≤95% RH |
| Display | 2.4” TFT |
| Controller | Microprocessor |
| Safety Features | Shrouded plugs and sockets |
| Compliance Marks | CE |
| Maximum Voltage (V) | 300 |
| Maximum Current (mA) | 3000 |
| Maximum Power (W) | 300 |
| Number of Output Pairs | 5 |
| Operating Modes | Constant Parameter, Programmable 6 Step Programme. Pre-programmed settings |
| Output Diameter (mm) | 4 |
| No Load Detection | Yes |
| Overload Detection | Yes |
| Ground Leakage Detection | Yes |
| Over Temperature Protection | Yes |
|
|
|
سجل معنا في القائمة البريدية ليصل اليك كافة المستجدات والعروض التي هي محل اهتمامك