DC Voltage Input Sensor

£

DC Voltage Input Sensor

Overview

The DC Voltage input cable allows you to connect 3rd party sensors with a DC Voltage ouput to the UX120-006M, ZW Series or the U series of data loggers.

Highlighted Features

  • Available in 4 ranges: 0 to 2.5, 0 to 5, 0 to 10, 0 to 24 VoltsDC
  • Cable length is 1.8 m (6 foot) cable with 13 mm (0.5 in.) tinned braided wire leads

In what environment does this sensor operate?

This sensor operates in indoor and outdoor environments.

What measurements does this sensor support?

The CABLE-DCVOLT sensor supports the following measurement: DC Voltage

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available

  CABLE-2.5-STEREO CABLE-ADAP5 CABLE-ADAP10 CABLE-ADAP24
Max. Input 0-2.5 VDC 0-5 VDC 0-10 VDC 0-24 VDC
Accuracy with UX120-006M, MX1104, MX1105 ±0.1 mV ±0.1% of absolute reading ±0.2 mV ±0.3% of reading ±0.4 mV ±0.3% of reading ±1.0 mV ±0.3% of reading
Accuracy with ZW ±1.5 mV ±2% of reading typical ±3.1 mV ±2.2% ±6.2 mV ±2.2% n/a
Accuracy with U12 ±2 mV ±2.5% of absolute reading ±4 mV ±2.7% of reading ±8 mV ±2.7% of reading ±20 mV ±2.7% of reading
Resolution w/UX120-006M, MX1104, MX1105 0.002% of full scale  0.002% of full scale  0.002% of full scale  0.002% of full scale
Resolution w/U12 and ZW 0.03% of full scale  0.03% of full scale  0.03% of full scale  0.03% of full scale
Cable Length 1.8 m (6 foot) cable with 13 mm (0.5 in.) tinned braided wire leads  1.8 m (6 foot) cable with 13 mm (0.5 in.) tinned braided wire leads  1.8 m (6 foot) cable with 13 mm (0.5 in.) tinned braided wire leads  1.8 m (6 foot) cable with 13 mm (0.5 in.) tinned braided wire leads

سجل معنا في القائمة البريدية ليصل اليك كافة المستجدات والعروض التي هي محل اهتمامك